Step By Step Process To Make Dresser With The Textured Panels By Your Own

Step By Step Process To Make Dresser With The Textured Panels By Your Own

There are so many furniture available in the market, all of them are used for different purposes, dresser is also one of the most unique and amazing furniture, that is used to store so many things in it, we can also use it for different purposes, like as a make up dresser, sink dresser and many more, there are so many of the designs also available in the market, but if you have a normal dresser, then you can give it unique textured panels, here is the step by step complete process by which we can make our own textured panels.

Step By Step Process To Make Dresser With The Textured Panels By Your Own:

1. Select The Dresser:

If you want texture paint on the panels, then the panels should be plane and there will not be any embroidery in it, also there will not be any dents or bumps in it, if these are small, then we can use the buffing tool, also the panels should easily remove and glide on the glider easily.

Select The Dresser

2. Make The Border:

To give the dresser a texture paint, you need to take out all the panels, take the clean cloth and clean out any dirt on it, now you need to take the small wooden lattice, place the lattice to the corners of the panels, measure the lattice if they are big, then cut them out, now take the wood glue and apply it on the back side of the lattice, now stick all the lattice to make the border of it, take the tweezers, place this to the all the sides of the lattice, leave it for sometime, so that the border will become thick, do this for all the panels.

Make The Border

3. Buffing The Edges:

Now you need to take the buffing tool or you can wrap the buffing paper to the wooden block, now slowly rub it to the edges of the panels, so that there will not be any sharp edges also, if there are any chips are there then you should also remove it, buff the joining point of the lattice also, do this with all the panels, take the cotton cloth and clean out the dust of the panels.

Buffing The Edges

4. Paint The Panels:

Now you need to take the paint in the plate, take the roller and roll it on the paint, now give a nice coat of the paint to all the panels, if there are any sharp edges, then you need to paint it by using the brush, give the dresser and the panels a nice two coat of the color.

Paint The Panel


5. Give The Texture To The Panels:

To give the panels a nice texture, then you need to take the burlap cloth of any color but the color should be contrast to the color of the painted panels, now you need to take the chisel, take out the lattice of the panels, now place the burlap to the panels, cut it according to the dimensions of panels, now apply glue only to the edges of the panels, place the burlap on it, now again place the lattice to it and then nailed it with the brain nails.

6. Finalize The Dresser:

Now you need to insert all the panels of the dresser and then check that all the panel are coming out smoothly, place the desired things on the top of the dresser and your texture painted panel dresser is ready to use.

Finalize The Dresser