Step By Step Process To Built In Bookcases From Ikea Shelves

Step By Step Process To Built In Bookcases From Ikea Shelves

We always want changes to our interior of our house, some of our stuff has no place to set, if we have kids, then there books can never be on place, so we can go with the ikea shelves and make the beautiful bookcases from it, you need to just buy the ikea shelves from the market, some screws, drill machine. Here is the step by step easy process to make your bookcase from the ikea shelves.

Step By Step Process To Built In Bookcases From Ikea Shelves:

1. Prepare The Frames:

First you need to take the frame of the ikea shelves, there are vertical, horizontal and supporting frames, all have the screws in it, take the screws and insert screw in each hole.

Prepare The Frames

2. Make The Shelve:

Now you need to place the vertical block first, now place the stand block to it, now place the top and the bottom shelve to it, place the other vertical block to it, you need to do this for all the 3 shelves.

Make The Shelve

3. Tighten The Screws:

Now you need to take the drill machine, place the screw bit to it, now tight all the screws of the blocks, make sure that you have tighten all the screws diagonally opposite to each other, do the same process for all the shelves.

Tighten The Screws

4. Place The Back Sheet:

Now you need to measure the back of the shelve, take the thin wooden sheet, now cut it according to the measured size, now place this side to the back of the shelve, now again take the drill machine, make the hole in the sheets, take the screw, place it in the holes and then tighten the screws.

Place The Back Sheet


5. Remove The Baseboard:

We all have the baseboard to the side of the floor, so you need to take the cutter, place it just to the starting point of the baseboard, now cut it, slowly insert it to the sides of the baseboard, take out the baseboard, now take the buffing machine and make the surface smooth.

Remove The Baseboard

6. Place All The Shelves Together:

Now all of your shelves are ready, place them to the wall, if there is any electricity board to the walls, then you need to take the cutting tool and cut the board of the shelf accordingly, make sure there should not be any gap between the shelves and the wall.

Place All The Shelves Together

7. Fix All The Shelves Together:

Now take the drill machine, make hole to the sides of the shelves, add the screws to it, make it tight, if the drilling is not possible, then you can nail the shelves from both the sides of the shelves.

Fix All The Shelves Together

8. Fix The Shelves To Wall:

Now you need to place the wall clamp to all the top of the shelves, take the metal detector, check out the wire installation to the wall, now take the drill machine, make hole in it, now place the screw holder in the hole, now take the screw insert it in the clamp and then tight it in the wall, do this for all the shelves.

Fix The Shelves To Wall

9. Attach All The Inner Shelves:

Now you need to take the inner shelves, take your books, measure it and then you will see the attached holes to the sides of the shelves, now you need to attach the shelves according to your books, attach all the shelves, now take the cotton piece and clean the shelves, you bookcase for the ikea shelves is ready to use.

Attach All The Inner Shelves